Msi x58 pro manual

The quality of the capacitors can impact the stability of the entire system and risk of product failure. Currently there are two types of capacitors, electrolytic capacitors and solid capacitors. Compared to electrolytic capacitors, solid capacitors have a longer lifespan, and provide a more stable power under high temperatures. With such benefits is it no wonder that solid capacitors are very important for product quality's improvement.

A choke is an inductor responsible for storing power and regulates the current. All shielded choke could reduce core power loss, lower EMI interference, and store energy longer at higher frequency, achieving higher efficiency. The underlying idea is to switch off the power supply as soon as no electricity is needed, and when the system needs more resources again, APS will automatically adjust electricity supply accordingly.

PCI-E x1 2. PCI 2. IDE 1. TPM header 1. USB 2. Form Factor ATX. DrMOS Y. Lift the load lever up and open the load plate. The CPU socket has a plastic cap on it to protect the contact from damage. Before you install CPU, always cover it to protect the socket pin. Romove the cap from the lever hinge side as the arrow shows.

Be sure to grasp on the edge of the CPU base. Note that the alignment keys are matched. Visually inspect if the CPU is seated well into the socket. If not, take out the CPU with pure vertical motion and reinstall. Press down the load lever lightly onto the load plate, and then secure the lever with the hook under retention tab. Cover the load plate onto the package.

Make sure the four hooks are in porper position before you install the cooler. Aligntheholesonthemainboardwith the heatsink.

Push down the cooler until its four clips get wedged into the holes of the mainboard. Turn over the mainboard to confirm that the clip-ends are correctly inserted. Press the four hooks down to fasten the cooler. The appearance of your mainboard may vary depending on the model you purchase. M emory. Please refer to the following illustrations for memory population rules. Single-Channel mode. Dual -Channel mode. In Dual-Channel mode, the memory modules can transmit and receive data with two data bus lines simultaneously.

Enabling Dual-Channel mode can enhance the system performance. Triple-Channel mode. In Triple-Channel mode, the memory modules can transmit and receive data with three data bus lines simultaneously. Enabling Three-Channel mode can enhance the best system performance. The position of the LED is shown as below. Double confirm with your memory module vender for the third channelsupports. Installing Memory Modules. The memory module has only one notch on the center and will only fit in the right orientation.

Insert the memory module vertically into the DIMM slot. Then push it in until the golden finger on the memory module is deeply inserted in the DIMM slot. The plastic clip at each side of the DIMM slot will automatically close when the memory module is properly seated. Manually check if the memory module has been locked in place by the DIMM slot clips at the sides. You can barely see the golden finger if the memory module is properly inserted in the DIMM slot.

Fr Interrupteur Fr Indicateurs du statut LED Fr Information de Logiciel If you do not have the CPU cooler, consult your dealer before turning on the computer. Seite 16 5. Visually inspect if the CPU is seated 6. If not, take out package. Seite 17 M S M ainboard 9. Align the holes on the mainboard with Press the four hooks down to fas- the heatsink.

Push down the cooler ten the cooler. Seite 19 M S M ainboard Three-Channel mode In Three-Channel mode, the memory modules can transmit and receive data with three data bus lines simultaneously. Enabling Three-Channel mode can enhance the best system performance. The memory module has only one notch on the center and will only fit in the right orientation.

Insert the memory module vertically into the DIMM slot. Then push it in until the golden finger on the memory module is deeply inserted in the DIMM slot. To connect the ATX pin power supply, make sure the plug of the power supply is inserted in the proper orientation and the pins are aligned.

Seite 24 Audio Ports These audio connectors are used for audio devices. It is easy to differentiate be- tween audio effects according to the color of audio jacks. Line-Out Green - Line Out, is a connector for speakers or headphones. Each connector can connect to one Serial ATA device. If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control.

Please refer to the TPM security platform manual for more details and usages. Press the button to turn- on or turn-off the system.